Home / Android / Install OnePlus 7 Pro ROM Port on OnePlus 6/6T

Install OnePlus 7 Pro ROM Port on OnePlus 6/6T

The OnePlus 7 Pro arrives with quite a few bells and whistles compared to previous OnePlus flagships. Whether these justify the cost or not is a different matter. Although OnePlus has said most of the software features from the OnePlus 7 Pro will be coming to previous OnePlus devices, that may take time. If you’d rather not wait, you can install a OnePlus 7 Pro ROM port on your OnePlus 6/6T right now.

OnePlus 7 Pro ROM port

XDA Senior Member ProtoDeVNan0 has ported the OnePlus 7 Pro ROM to the OnePlus 6/6T.  The ported ROM will install the OxygenOS 9.5.4 firmware from the OnePlus 7 Pro to your OnePlus 6/6T. One the OnePlus 6, nothing related to an on-screen fingerprint scanner will work, obviously. Moreover, Face unlock doesn’t work on either of the devices since they don’t have a motorized pop-up camera and the OnePlus 7 Pro does.  Almost everything else should work as expected but be prepared to run into random bugs.

You can participate in the development by visiting the development thread on XDA from the source link provided at the bottom of this article.

Note

Flashing custom ROMs on your device can be harmful to the proper functioning of your device. You even run the risk of bricking your device. In many cases, this can also lead to loss of all the data stored on the device. You’ve been warned of the risks involved. Therefore, DroidViews or anyone else cannot be held responsible for anything that goes wrong with your device. Even if you follow this guide correctly, things can still go wrong for a myriad of reasons. You’ll be responsible for anything you do to your phone.

That said, if you do end up in a boot loop of with a bricked device, you can follow our tutorial on restoring the OnePlus 6 to the stock OxygenOS firmware.

Requirements

  1. A OnePlus 6/6T with an unlocked bootloader running OxygenOS Open Beta 18 (or an equivalent for the OnePlus 6T).
  2. A computer with ADB and Fastboot installed. If you need help, you can refer to our guide about how to install ADB and Fastboot on Windows, Mac and Linux.
  3. Windows users will also need to install the OnePlus USB Drivers.
  4. Installing the fastboot ROM will wipe your entire device so make sure you’ve backed up everything, if possible.

Downloads

Install OnePlus 7 Pro ROM Port on OnePlus 6/6T (OxygenOS 9.0.0)

  1. Download the zip files linked above in the Download section.
  2. Extract the downloaded files into the same folder on your computer.
  3. Reboot your OnePlus 6/6T into the fastboot mode. In case you don’t know how to do this and haven’t even turned on Advanced reboot, power off your device. Now press and hold the Power and Volume Up buttons at the same time until you see some text on the screen as shown below. OnePlus fastboot mode
  4. When in the fastboot mode, connect your phone to your computer with a USB cable.
  5. When the flashing is done, disconnect your phone and reboot while holding the Volume down button. This will boot your device into recovery mode.
  6. Factory reset the device from the recovery mode.

When your device boots up, get past the initial setup and transfer the OnePlusGallery.apk file from the Install After Boot folder. Install the APK like any normal APK and enjoy your new OnePlus 7 Pro ROM port.

Read Next: What is Init.d and What Can Init.d Support Do on Android?


>> Source Link

Loading...

Check Also

There’s more than just Amazon Echo

Polk Command Bar Alexa speaker is 4K and HD TV compatible. When it comes to …