Home / Computer / Full Solutions to Fix Disk Boot Failure Issue in Windows 10/8/7 – iSumsoft

Full Solutions to Fix Disk Boot Failure Issue in Windows 10/8/7 – iSumsoft

Found the Disk boot failure error in your HP, Dell, Acer, Lenovo laptop or desktop? This post will provide some basic solutions to fix this issue for Windows 10/8/7 users, as well as provide suggestions for you to protect your PC from hard disk or system corruption.

In
this guide, you’re will learn about the causes of the issue and how you can fix
the disk boot failure insert system disk and press enter issue on your Windows
10 computer. Let’s check it out:

  • Part 1: Reasons for disk boot failure issue
  • Part 2: Solutions to repair disk boot failure

Reason for disk boot failure error

The disk boot failure error occurs mainly because the BIOS cannot find a bootable drive to start the computer. This may be caused by various reasons, such as incorrect boot order in the BIOS, hardware device incompatibility issues, system file corruption, bootable disk corruption, hard drive connection problems, external attacks (such as viruses or malware).

Regardless of the cause of this problem, you can try the following solutions to fix the disk boot failure and let your PC boot.

How to fix disk boot failure in Windows 10?

In general, there are several ways to fix this disk problem based on different factors, you can try it according to the actual situation in Windows 10/8/7.

Method 1: Check your PC boot order

Make sure your hard drive (where the operating system is installed) is set to the first boot device.

Step 1: Restart your computer and immediately press a specific key to enter the BIOS. The keys may change for different PCs. Refer to this post How to Enter the BIOS on Your Computer for help.

Step 2: Go to the “Boot” tab, select the hard drive as the first boot option, save these settings, and try to restart your computer again.

Method 2: Remove the recently installed hardware

On most PCs, newly installed hardware is often the cause of disk boot failures. If you recently installed a hardware device on your PC, you can try removing it to see if it resolves the issue. If the hardware device is the cause of the problem, then your PC should boot normally after removing that hardware.

If an error message is displayed, proceed to the next step.

Method 3: Check for and repair hard disk errors

If you suspect that the hard drive has failed, you can run a diagnostic to test the hard drive. Some computer problems can be resolved by checking the hard drive for errors. To do this, boot the computer from the Windows 10 installation media.

After your computer boots up and the Windows Setup appears, press Shift + F10 keys together on the keyboard. This will open the command prompt window.

In the Command Prompt window, type chkdsk /r c: and press Enter. (Here c represents the drive where Windows 10 is installed). Click Y when you are asked if want chkdsk to run when the system restarts next.

Restart the system, chkdsk will be automatically launched to check and repair disk errors in Windows 10.

When you are in a Windows recovery environment, you can use the System File Checker tool to repair missing or corrupted system files. Restart your computer when you are done.

Method 5: Restore the system

Tried the above solution, but still can’t get rid of the disk boot failure error in Windows 10? If this is the case, we suspect that your system file may be corrupted. To fix it, you need to use the system disk for system repair or system recovery.

Insert and boot from the Windows 10 installation disk, navigate to Repair the computer -> Troubleshooting -> System Restore.

Follow the instructions on the screen to continue the process and fix the disk boot failure in Windows 10.

These are all solutions to the problem of disk boot failures caused by all typical causes. Hope at least one of them is helpful! If none of the above methods are right for you, proceed to the next step.

How to replace a hard drive after repairing a disk boot failure in Windows 10

If you have backed up your computer to an external hard drive, you can replace your hard drive and restore your system from a backup. However. However, if you don’t have a backup and the information is critical, you can use a data recovery software to recover the data.

Replace Hard drive


>> Source Link

Loading...

Check Also

Definition, Types & Truth Tables (Complete)

Hearing the term logic gate certainly refers to things that are technical or rather the …