Home / Android / 20 build.prop Tweaks to Customize Your Android in Awesome Ways

20 build.prop Tweaks to Customize Your Android in Awesome Ways

As we’ve previously discussed, build.prop is the single most important file on Android if you measure importance by the number of potential customizations this single file holds. Editing the build.prop is not a difficult process either, yet, we have a dedicated guide for it. Just in case this is your first time messing with the build.prop file, and you don’t know what blunders it can unfold on your device, be sure to check out how to Edit build.prop on Android. Listed below are 20 build.prop tweaks that you can do.

20 build.prop Tweaks to Customize Your Android

1. Make your phone ring as soon as you get a call

Android devices generally wait to verify a connection before they start ringing. This tweak disables the waiting time and makes your phone ring as soon as you get a call. The waiting time isn’t that long, though. In any case, just add these lines at the end of your build.prop file.


Must Read: What is Magisk Manager and How to Use It

2. Disable built-in error reporting

Add the following lines at the end of the file.

profiler.force_disable_err_rpt=1 profiler.force_disable_ulog=1

3. Fix black screen issue after a call

In case you experience a few seconds long blackout after each call, this could be an issue with your proximity sensor. Edit the following lines to your build.prop to the values shown below.

ro.lge.proximity.delay=25 mot.proximity.delay=25

4. Enable Auto-rotation on the Lock Screen

Auto-rotation on the lock screen was present on earlier Android devices. But with the latest versions, this has been disabled on smartphones, while it is still present on Android Tablets. However, if for some reason you wish to have it back, just add the following line to the bottom of your build.prop.


Don’t miss: Find Out Who is Stealing Your WiFi Data and Block Them on Android

5. Enable Auto-rotation on the Home Screen

The above still holds true for home screens on Android smartphones versus Android tablets. If you have a custom Launcher installed, this shouldn’t be a problem for you at all. But if you use an Android or OEM stock launcher, add the following line at the bottom of your build.prop file.


6. Improve your Internet connection

Most Android devices use their carrier’s DNS service by default. Google also has a set of free DNS services that anyone can use. And isn’t it obvious whose DNS services would be better when it comes to Google vs mobile network carriers? You can add the following lines to your build.prop to force your device to use the more reliable Google DNS services.

net.dns1= net.dns2=

7. Improve Scrolling

This tweak modifies the maximum and minimum fluid velocity to improve scrolling animations and speed. Just add the following line to the bottom of your build.prop

windowsmgr.max_events_per_sec=150 ro.min_pointer_dur=8 ro.max.fling_velocity=12000 ro.min.fling_velocity=8000

8. Improve Call quality


9. Enable or disable On-screen Navigation keys

Quite a few Android devices come with on-screen software navigation keys, and many also come with hardware capacitive touch buttons. For whatever reason, if you wish to disable the on-screen navigation keys, add the following line to your build.prop.


On the other hand, in case your hardware keys are acting up or for any other reasons, you want to enable software navigation keys, just change the value of the above line to ‘0’ and add it to the bottom of the build.prop


You must know: How to Edit MP3 Tag and Album Art on Android

10. Change screen DPI for bigger or smaller text and icons

Changing the DPI is one of the most popular and favorite build.prop edit among modders. So much so that this single edit has several dedicated apps on the Play Store for those who don’t want to get their hands dirty and do the job themselves. A higher DPI value results in a smaller UI, smaller texts, smaller icons.

A lower DPI results in a larger UI, larger texts, and larger icons. In the case of less powerful devices, you may notice a performance log when setting the DPI higher, and a performance boost with a lower DPI. Also, you shouldn’t get too playful with this, because if you set a value too high or too low, you might not be able to operate your device at all. Find the following line on your build.prop, and replace the XXX with a value you like.


Usually, the standard values of XXX are a multiple of 160. That is, 160, 320, 480, 640, etc.

11. Improve Picture Quality

Most Android devices render images at a lower quality to save the processor from the burden. This is in no way a bad quality, just not the top quality that your device can achieve. Although, these days with more powerful processors entering the mid-range and even some budget smartphones, there’s mostly always the required power to pull this off. If you think your device can handle rendering images at the best possible quality, add the following line to the bottom in the build.prop


12. Increase the time between WiFi network scans

By default, Android looks for nearby WiFi networks every 15 seconds if your WiFi is turned on. This can be useful if you live in a large house or are at the airport where you move between multiple access points. But most of the time it is usually a drain on the battery. Adding the following line to the end of your build.prop file can help, in case you wish to change the default 15-second policy.


Here, XXX is the time interval in seconds. So if you want that your device should look for nearby networks only after 2 minutes, replace XXX with 120.

13. Enable faster boot

This a simple tweak. Simply add the following line at the end of the build.prop file.


You will notice a difference the next time you reboot your device depending on your hardware specifications.

14. Keep Back-lit Capacitive Keys On while Screen is On


Useful tips for you: What is NFC? How to Use It in Awesome Ways!

15. Better Network Signals

This tweak enables Fast Dormancy, but this also depends on your network provider. Both the Network and the device should support Fast dormancy. Usually, when your Android device connects to a network, it undergoes certain states to stay connected. With Fast Dormancy disabled, the only available states are connected or disconnected.

In the connected state, the device has to go through all its internal functions anytime there’s a change in the network to maintain the connection. This, of course, uses a lot of resources. Fast dormancy allows the device to cycle through 5 states that use lesser or more power depending on the task at hand. Don’t worry, we wouldn’t go deeper into that. Just add the following lines to your build.prop and you’re good to go.

persist.cust.tel.eons=1 ro.config.hw_fast_dormancy=1

16. Disable USB Debugging notification


17. Force 270-degree rotation in all apps

You may have noticed that even with Auto-rotation enabled, some apps would only rotate into a predefined 180-degree span. This is especially true for some games which rotate on the opposite side of where you’re holding your device. It is then your only choice to rotate the device itself. Adding the following line at the end of your build.prop can help.


18. Lock the launcher in memory

Some Android devices have a very aggressive attitude towards background apps in order to save RAM or battery. Sometimes often on devices with ample amounts of RAM. That’s called a poor RAM management. On some devices, when you press the home button, the launcher has to be loaded all over again with the icons and all. This requires resources of course. In that case, add the following line of code to your build.prop. This will lock the launcher into the RAM memory thus preventing it from being killed.


19. Increase resolution of panorama image

This will force the panorama mode in the camera app to save the image at a higher resolution. This may not be supported by all phones.

ro.media.panorama.defres=3264x1840 ro.media.panorama.frameres=1280x720

defres is for the full panorama image resolution, consisting of all images while frameres provides the resolution of each frame of a panorama.

Recommended for you: Download and Install SamsungOne Font on Your Android

20. Disable Android logger – logcat

The Android logging system provides a mechanism for collecting and viewing system debug output. Logs from various applications and portions of the system are collected in a series of circular buffers. But if you’re not a developer, you don’t generally need a log cat. Disabling it can save some disk reads/writes thus improving performance in theory. However, there probably wouldn’t be any noticeable gain.



>> Source Link

Check Also

Want to spin up Ubuntu VMs from Windows 10’s command line, eh? We’ll need to see a Multipass • The Register

Windows 10 developers have been gifted yet another way of running Linux on their desktop …

%d bloggers like this: